Sheet Pile Design and Sheet Pile Section

U type sheet pile

U type sections have been widely used for various
types of permanent and temporary structures, and
one of the most familiar sheet piles among designers
as well as users.

 

FSP-II,III,IV are solidly designed.
These sections are especially suitable for
repeated use, and have acquired high market
acceptance from users.

 

U type sections offer section modulus ranging from
874 cm3 to 3820 cm3 per linear meter of wall.

 

 

Box type sheet pile

Box type sections are made of two U type sections welded together into a box shape. Appropriate combination
of sheet piles makes available a wide range of section modulus, and depending upon design requirements,
the most suitable and economical combination can be selected.

Having section modulus ranging from 4170 cm3 to 8750 cm3 per linear meter of wall, Box type sections are
suited in large quay walls.

The length of each U type sheet pile welded together into a box section can be changed to meet design
conditions, and this means great economy. 

Z Steel Sheet Pile Sections

Normally, there are AZ, PZ sections. The unique characteristics of the Z sheet pile are the continuous form of the web and the specific location of the interlocks on the outside of the profile, presenting the following advantages:

• an extremely competitive relation section modulus/mass;
• an increased inertia reducing the deflection;
• no reduction of bending moment due to oblique bending or displacement of the neutral axis.

 

 
 

All of our sheet piles according ASTM A 328, ASTM A 690 standards

with continuous form of the web and the location of the interlock symmetrically on each side of the eneutral axis. It has great improvement on the section modulus. Following are the main advantages:

1. Large width, good installation performance

2. Extremely competative of section-modulus to mass ratio

3. Increased inertia for reduced deflection

4. Good corrosion resistance 

About Shunli Steel Sheet Pile

Shunli Steel Group, consisted of Jiangsu Shunli Cold-formed Steel Industrial Co., Ltd, Jiangsu Shunli Racking Industrial Co., Ltd and Nanjing Channel (International) Trading Co., Ltd, is a leading manufacturer of cold-formed steel products in China. Shunli Steel Group established in 1996 ,and now occupies land area of 260, 000m2, with stuff of more than 700 people. The annual output is USD 1.3billion.

Shunli Steel Group is integrated with research, design, manufacture and development activity, project implementing and international business. The manufacture capability of cold-fromed steel products of the whole group is about 500,000tons per year and covers more than 4000 different kinds of products.

Shunli Steel Group is one of the main suppliers of government invested projects like Three Gorge project, Shanghai-Beijing express railway, capital airport, Jingtang steel bridge and beijing Olympic stadium, three gorge project, Shanghai Pudong international airport, Lian Yuangang nuclear power station and Xichang satellite launching center, etc. And the products also be sold all over the world and earned high reputation.

The main export products of Shunli Steel Group covers sheet pile, h-beam, ERW, pallet racking and steel structure and different kinds of steel channel. The products are popular applicated in all of the world.

For More information, please contact us :

Website : http://www.sheetpiling-china.com
Sale Manager : Joanna Shaw
Mobile : 86-(0)-13905190622
Phone : 86-25-84722733
Fax : 86-25-84730966
Email : 13905190622@139.com admin@shunlisteel.cn
Address : Apt.3405 Building B of New World Center, No.88 Zhujiang Road, Nanjing, China.
Add. of factory : No.2 Shuli Road, Jiangning Riverside Economy and Technology Development Zone, Nanjing, China.